In-Wall Subwoofer System with Dual 13.5-inch Subwoofers, 2000 watts

The same minds that engineered JL Audio’s reference-grade Fathom® and Gotham® powered subwoofers have created an amazing in-wall subwoofer solution, centered on a pair of innovative, thin-line drivers with groundbreaking technologies.

Housing these exotic drivers are two critically engineered enclosures with a unique floating mount design to minimize wall excitation. The enclosures feature extensive architectural features aimed at improving rigidity while keeping a very low profile and minimal wall thickness.

A paintable, fine steel-mesh grille, also designed to control vibration, is included for each enclosure in the system.

The IWSv2-SYS-213 is driven by a rack-mountable, purpose-tuned amplifier, capable of delivering up to 2 kW of clean power, and armed with serious processing features, including our latest Digital Automatic Room Optimization system.

There is no need to lower your expectations when selecting this remarkable in-wall solution... it's a real Fathom®.

The IWSv2-SYS-213 is available to fit a variety of 2" x 4" and 2" x 6" wall studs. Consult your Authorized JL Audio Dealer for specific application information.

Enclosure Finish: Flat Black (hidden from view when installed)

Grille finish: Primer White (paintable)

Enclosure Construction: CNC-Cut Birch Plywood

Enclosure Type	Sealed
Enclosure Finish	Black Texture-Coated
Frequency Response (Anechoic)	26 Hz - 101 Hz (± 1.5 dB) -3dB at 25 Hz / 112 Hz -10dB at 22 Hz / 150 Hz
Effective Piston Area (Sd)	196.51 sq in / 0.1268 sq m
Effective Displacement	294.6 cu in / 4.82 L
Amplifier Power	2000 W RMS short-term
Power Mode(s)	Off, On or Automatic (Signal-Sensing)
Light Modes	Off, On or Dim

Unbalanced Inputs	Stereo or Mono (two RCA jacks)
Balanced Inputs	Stereo or Mono (two female XLR jacks)
Speaker/High-Level Inputs	N/A
Input Grounding	Isolated or Grounded
Input Modes	Master or Slave
Level Control	Reference (fixed gain) or Variable, from full mute to +15dB over reference gain
Filter Mode(s)	Low-Pass
Filter Slope(s)	12/24 dB/octave
Filter Frequency Range	30 Hz - 130 Hz
Filter Defeat Function	Yes
Polarity	0 or 180 degrees
Phase	Variable, 0- 270 degrees, referenced to 80 Hz
Extreme Low Frequency (E.L.F.) Trim	Variable, -12 dB to +3 dB at 23 Hz
Line Outputs	N/A
Output to Slave	Balanced (one male XLR jack)
Calibration Mode	Digital Automatic Room Optimization (D.A.R.O.), includes laboratory-grade microphone

Lineart Top-View and Side-View of IWS Subwooofer for 2 by 4-inch studs with Height (H), Width (W) and Depth (D) dimension labels

Wall Cavity Width (W)	Minimum: 14.375 in / 365 mm Maximum: 14.875 in / 378 mm
Wall Cavity Height (H)	Minimum: 93.625 in / 2,378 mm
Width (W)	13.75 in / 349 mm
Height (H)	70 in / 1,778 mm
Depth (D)	2.94 in / 75 mm
Note: Enclosure dimensions do not include vibration-dampening padding.

Lineart Top-View and Side-View of IWS Subwooofer for 2 by 6-inch studs with Height (H), Width (W) and Depth (D) dimension labels

Wall Cavity Width (W)	Minimum: 14.375 in / 365 mm Maximum: 14.875 in / 378 mm
Wall Cavity Height (H)	93.625 in / 2,378 mm
Width (W)	13.75 in / 349 mm
Height (H)	55 in / 1,397 mm
Depth (D)	4.70 in / 119 mm
Note: Enclosure dimensions do not include vibration-dampening padding.

Lineart Back Panel, Front Panel and Top-View of IWSv2 Amplifier with Height (H), Width (W) and Depth (D) dimension labels

Width (W)	17.4 in / 442 mm
Height (H)	3.5 in / 89 mm
Depth (D)	17.9 in / 455 mm
Net Weight	43 lb / 19.5 kg
Note: Amplifier Height Dimensions do not include feet.

Lineart Grille Front and Wall Opening views for IWS Grille with Height (H) and Width (W) dimension labels

Grille Height (H)	17.64 in / 448 mm
Grille Width (W)	17.14 in / 435 mm
Wall Opening Height (H)	16.50 in / 419 mm
Wall Opening Width (W)	16.00 in / 406 mm

Digital Automatic Room Optimization (D.A.R.O.)

Summary:
JL Audio's exclusive D.A.R.O. technology uses a powerful on-board DSP to automatically optimize the subwoofer's in-room frequency response. This leads to a superb listening experience, no matter where the subwoofer is placed.

Detailed Information:
In typical listening spaces, subwoofer and listener placement have a profound effect on the accuracy of low-frequency reproduction. While we always recommend that you place your subwoofers in good-sounding locations, we know that these often can be impractical locations. In the real world, subwoofer placement almost always involves a compromise between sonic performance, practicality and aesthetics.

To face this dilemma head on, JL Audio subwoofer systems incorporate a clever piece of technology called Digital Automatic Room Optimization (D.A.R.O.). The D.A.R.O. system self-generates a series of calibration tones, measures the frequency response at the listening position, and automatically configures an 18-band, 1/6 octave equalizer for a flat end-result. The system effectively allows for smooth, well-balanced sub-bass from a variety of locations that would have been less than ideal without D.A.R.O.

To perform this audio magic, all you have to do is:

Connect the included calibration microphone to the front panel of the subwoofer.
Press the calibrate button on the front panel of the subwoofer.
Hold the microphone at the primary listening position for about a minute.
A few minutes later, you have completed this one-time setup routine.

You won't need a computer, spreadsheets or complex measurement equipment, and you won't need to navigate and manipulate complicated interfaces… D.A.R.O. is a fine example of technology in the service of man, if there ever was one.

Read a review of the D.A.R.O. feature on Acoustic Frontiers

Dynamic Motor Analysis - DMA Optimized Motor

Summary:
JL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.

Detailed Information:
Since 1997, JL Audio has been at the forefront of Finite Element Analysis-based modeling of loudspeaker motors and suspensions. This research is aimed at decoding what we refer to as the "Loudspeaker Genome"... a project aimed at understanding the true behavior of loudspeakers under power and in motion. A major component of this integrated system is DMA (Dynamic Motor Analysis). Starting with the 15W3 and the W7 Subwoofers in the late 1990's and early 2000's, DMA has played an important role in the design of all JL Audio woofers sold today, including our component woofers.

DMA is a Finite Element Analysis (FEA)-based system, meaning that it takes a large, complex problem, breaks it down into small solution elements for analysis and then assembles the data to form an accurate, "big-picture" solution. DMA's breakthrough is that it actually considers the effects of power through the coil as well as coil/cone position within the framework of a time-domain analysis. This gives us a highly accurate model of a speaker's actual behavior under real power, something that the traditional Thiele-Small models or other low power measurements cannot do. Because DMA does not rely on a steady-state model, it is able to consider shifts in the circuit elements being analyzed. These modeling routines are intense, requiring hours to run for a whole speaker.

DMA is able to analyze the real effects of fluctuating power and excursion upon the magnetic circuit of the motor, specifically the dynamic variations of the "fixed" magnetic field. This delivers intensely valuable information compared to traditional modeling, which assumes that the "fixed" field produced in the air gap by the magnet and the motor plates is unchanging. DMA not only shows that this "fixed" field changes in reaction to the magnetic field created by current flowing through the voice coil, but it helps our engineers arrive at motor solutions that minimize this instability. Analyzing this behavior is critical to understanding the distortion mechanisms of a speaker motor and sheds light on the aspects of motor design that determine truly linear behavior:

Linear motor force over the speaker's operational excursion range
Consistent motor force with both positive and negative current through the coil
Consistent motor force at varying applied power levels

Our ability to fully analyze these aspects of motor behavior allows our transducer engineers to make critical adjustments to motor designs that result in extremely linear, highly stable dynamic loudspeaker motor systems.

The payoff is reduced distortion, improved transient performance and stellar sound quality.

Floating Cone Attach Method - FCAM™

Summary:
This assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.

Detailed Information:
JL Audio's patented FCAM™ technology is an innovative method of bonding the surround/cone assembly to the voice coil former/spider assembly. This feature helps ensure concentricity of the surround, spider and voice coil without torquing the suspension to achieve it. This allows for the inevitable, slight variations in production part dimensions without having them negatively impact the integrity of the suspension and coil-centering at high excursions.

Concentric Tube Suspension

Summary:
Our Concentric Tube Suspension™ technology delivers unprecedented excursion in a low-profile woofer.

Detailed Information:
The biggest challenge in any low-profile woofer design is to create enough mechanical clearance for the speaker to generate enough excursion to meet its output and low-frequency extension goals. Since these goals were very ambitious in the development of JL Audio's low profile woofers, achieving them required development of a new suspension architecture.

JL Audio's solution employs a molded structure which spans over the edge of the motor system, supporting the spider on the outside of the motor's boundaries and the large diameter voice coil on the inside. The large diameter voice coil permits the magnet to sit inside it, rather than surrounding the coil as is typical in most woofers.

Concentric Tube Sub-Assembly of a 13TW5v2

The concentric tube structure and the elimination of a conventional top-plate helps us place the motor system higher up into the cone body's space to further compress depth, while still permitting excellent mechanical excursion.

High-Damping Feedback Circuitry

Summary:
This proprietary, discrete control circuit design allows our Class D switching amplifiers to maintain an excellent damping factor for improved transient behavior and fidelity.

Detailed Information:
While Class D amplifiers are well known for outstanding efficiency, they have also been known for less than spectacular sound quality due to weak damping of the driven load and poor power regulation. These factors are critical to subwoofer fidelity as they relate directly to the amplifier's ability to control the motion of the speakers.

JL Audio's Patented Class D output circuit utilizes a discrete control section and a unique feedback loop design that results in outstanding power regulation with a damping factor that's vastly higher than other Class D designs and also higher than most Class A/B amplifiers. The benefit of this exclusive JL Audio technology is tight, clean bass reproduction with the efficiency advantage of Class D.

It is a package tailor-made for world-class bass performance.

Built in U.S.A. with Global Components

Summary:
JL Audio's Miramar, Florida loudspeaker production facility is one of the most advanced in the world.

Detailed Information:
At a time when most audio products are built overseas, JL Audio’s commitment to in-house loudspeaker production continues to grow. To pull this off in a competitive world market, our production engineering team has created one of the world’s most advanced loudspeaker assembly facilities and established a global network of quality component suppliers who build to our specifications. This, combined with our commitment to state-of-the-art assembly technology, allows our skilled workforce to efficiently build JL Audio products to extremely high quality standards, right here in the U.S.A.

Since most of our premium loudspeakers incorporate proprietary, patented technologies requiring specific assembly techniques, we find it is vital that the people who designed them have close access to the people manufacturing them. The following JL Audio products are built in our Miramar, Florida factory, with global components:

Subwoofers: W7, W6v3, TW5v2, TW3, TW1, W3v3
Enclosed Car Subwoofers: Stealthbox®, PowerWedge™, ProWedge™, H.O. Wedge™ & MicroSub™ Enclosed Subwoofers
Marine Loudspeakers, Marine Subwoofers and Marine Enclosed Loudspeakers
Home Subwoofers: Dominion™, E-Sub, Fathom® and Gotham®

Download Fathom® IWSv2-SYS-213 Product Manual

Download Fathom® IWS-ENC Installation Manual

Download Fathom® IWEv2-113A_3.50 Drawing (.dwg)

Download Fathom® IWEv2-113A_3.63 Drawing (.dwg)

Download Fathom® IWEv2-113B_5.50 Drawing (.dwg)

Download Fathom® IWEv2-113B_6.00 Drawing (.dwg)

Help Center Article: Fathom IWS-113 - Key Info to Know Before Ordering
Help Center Article: Fathom IWS-113 - Key Info to Know When Installing

USA Limited Warranty: Three (3) years from the original date of purchaseWarranty Details

Find the answers to many common questions:

A complete collection of Home Audio Reviews & Product Information

Absolute Sound Logo

2020 Editor's Choice Award Logo 2021 Editor's Choice Award Logo 2022 Editor's Choice Award Logo The Absolute Sound 2023 Editors' Choice Award

Editors' Choice Award Winner
The Absolute Sound, 2020-2023

"If you want uncompromised bass performance in a room that won't easily accommodate freestanding subwoofers, there's only one game in town."

Robert Harley on the IWSv2-SYS-213 - December 2019

Download the complete Fathom IWSv2 Subwoofer Review

SoundVision Logo

"It's a sub that makes no acoustic compromises, nor does it force you to make the lifestyle compromises that a typical in-room sub would. in some ways, it's a shame that all the cool technology here is hidden from view-but, when you think about it, not seeing anything of this system is the coolest part of all. If you've got the money, and you've got a wall, this sub's for you."

Darryl Wilkinson - Sound&Vision Top Pick of the Year, July/August 2017

Download the complete Fathom IWS Subwoofer Review

SoundVision Top Pick of the Year

Stay informed about new products and promotions.

Your Shopping Cart

Fathom® IWSv2

Fathom® IWSv2-SYS-11313.5-inch (345 mm) In-Wall v2 Powered Subwoofer System

Fathom® IWSv2-SYS-213Dual 13.5-inch (345 mm) In-Wall v2 Powered Subwoofer System

Newsletter

Fathom® IWSv2-SYS-113
13.5-inch (345 mm) In-Wall v2 Powered Subwoofer System

Fathom® IWSv2-SYS-213
Dual 13.5-inch (345 mm) In-Wall v2 Powered Subwoofer System